Configuring basic parameters for Huawei CloudEngine switches (for example 6865)

Transmission rate: 9600

Data bit (B): 8

Parity bit: None

Stop bit (S): 1

Flow control mode: None

An initial password is required for the first login via the console.

Continue to set it? [Y/N]: y

Set a password and keep it safe!

Otherwise you will not be able to login via the console.

Please configure the login password (8-16)

Enter Password:

Confirm Password:

<HUAWEI> system-view

[~HUAWEI] user-interface console 0

[~HUAWEI-ui-console0] authentication-mode password

[~HUAWEI-ui-console0] set authentication password cipher <>

[*HUAWEI-ui-console0] commit

#

stack member 1 renumber X - X - ID . , ID = 1

master- ID . 

#

stack member 1 priority 150 - .

master- .

 : 100.

#

stack member { member-id | all } domain <domain-id> - Domain ID .

, domain ID .

#



:

<HUAWEI> system-view

[~HUAWEI] sysname SwitchA

[HUAWEI] commit

[~SwitchA] stack

[~SwitchA-stack] stack member 1 priority 150

[SwitchA-stack] stack member 1 domain 10

[SwitchA-stack] quit

[SwitchA] commit

[~SwitchA] interface stack-port 1/1



[SwitchA-Stack-Port1/1] port member-group interface 10ge 1/0/1 to 1/0/4

Warning: After the configuration is complete,

1.The interface(s) (10GE1/0/1-1/0/4) will be converted to stack mode and be configured with the

port crc-statistics trigger error-down command if the configuration does not exist. 

2.The interface(s) may go Error-Down (crc-statistics) because there is no shutdown configuration on the interfaces.Continue? [Y/N]: y



[SwitchA-Stack-Port1/1] commit

[~SwitchA-Stack-Port1/1] return

[~SwitchA] interface stack-port 1/1

[*SwitchA-Stack-Port1/1] shutdown

[*SwitchA-Stack-Port1/1] commit

<HUAWEI> system-view

[~HUAWEI] sysname SwitchB

[*HUAWEI] commit

[~SwitchB] stack

[~SwitchB-stack] stack member 1 priority 120

[*SwitchB-stack] stack member 1 domain 10

[*SwitchB-stack] stack member 1 renumber 2 inherit-config

Warning: The stack configuration of member ID 1 will be inherited to member ID 2

after the device resets. Continue? [Y/N]: y

[*SwitchB-stack] quit

[*SwitchB] commit

<SwitchB> save

Warning: The current configuration will be written to the device. Continue? [Y/N]: y

<SwitchB> reboot

Warning: The system will reboot. Continue? [Y/N]: y

<SwitchA> display stack

--------------------------------------------------------------------------------

MemberID Role     MAC              Priority   DeviceType         Description

--------------------------------------------------------------------------------

+1       Master   0004-9f31-d520   150        CE6850-48T4Q-EI 

 2       Standby  0004-9f62-1f40   120        CE6850-48T4Q-EI 

--------------------------------------------------------------------------------

+ indicates the device where the activated management interface resides.

[~Switch] interface 25GE 1/0/20

[~Switch-25GE1/0/20] port link-type access

[~Switch-25GE1/0/20] port access vlan 10

[~Switch-25GE1/0/20] commit

[~Switch] interface 25GE 1/0/20

[~Switch-25GE1/0/20] port link-type trunk

[~Switch-25GE1/0/20] port trunk pvid vlan 10 - native VLAN ( VLAN )

[~Switch-25GE1/0/20] port trunk allow-pass vlan 1 to 20 - VLAN 1 20 ( )

[~Switch-25GE1/0/20] commit

<HUAWEI> system-view

[~HUAWEI] sysname SSH Server

[*HUAWEI] commit

[~SSH Server] rsa local-key-pair create //Generate the local RSA host and server key pairs.

The key name will be: SSH Server_Host

The range of public key size is (512 ~ 2048).

NOTE: Key pair generation will take a short while.

Input the bits in the modulus [default = 2048] : 2048

[*SSH Server] commit

[~SSH Server] user-interface vty 0 4

[~SSH Server-ui-vty0-4] authentication-mode aaa 

[SSH Server-ui-vty0-4] user privilege level 3

[SSH Server-ui-vty0-4] protocol inbound ssh

[*SSH Server-ui-vty0-4] quit

[SSH Server] aaa

[SSH Server-aaa] local-user client001 password irreversible-cipher <password string>

[SSH Server-aaa] local-user client001 level 3

[SSH Server-aaa] local-user client001 service-type ssh

[SSH Server-aaa] quit

[SSH Server] ssh user client001 authentication-type password

[~SSH Server] stelnet server enable

[*SSH Server] commit

[~SSH Server] ssh user client001 service-type stelnet

[*SSH Server] commit

clock timezone MSK add 03:00:00

clock datetime 10:10:00 2020-10-08

ntp unicast-server 88.212.196.95

commit

system-view

ip route-static 0.0.0.0  0.0.0.0 192.168.0.1

commit

system-view

stp mode mstp

commit

[SW] interface 10ge 1/0/3

[SW-10GE1/0/3] port link-type access

[SW-10GE1/0/3] port default vlan 10

[SW-10GE1/0/3] stp edged-port enable

[*SW-10GE1/0/3] quit

[SW] interface eth-trunk 1

[SW-Eth-Trunk1] port link-type trunk

[SW-Eth-Trunk1] port trunk allow-pass vlan 10

[SW-Eth-Trunk1] mode lacp-static ( lacp-dynamic)

[SW-Eth-Trunk1] quit

[SW] interface 10ge 1/0/1

[SW-10GE1/0/1] eth-Trunk 1

[SW-10GE1/0/1] quit

[SW] interface 10ge 1/0/2

[SW-10GE1/0/2] eth-Trunk 1

[*SW-10GE1/0/2] quit